User's Manual

Chapter 4 Target (AIS and TT) MDC-5200/5500 Series
0093155002-03 4-4
Set TT ID DISP TYPE
ID can be displayed with TT (ARPA) target.
Set items: NUMBER and LABEL
ID can be changed to favorite name.
Maximum 10 letters can be set for the name.
1 Press MENU key to display “Menu”.
Select [TARGET] => [TT] => [EDIT LABEL] => select 10 words, and press ENT key.
Set ID DISP SIZE
This menu is used to specify display ID size.
Selection values: X-SMALL, SMALL, MEDIUM, LARGE
Set Input range
This is to set up the operation range of TT (ARPA) and AIS.
It designates the entire operation range of TT (ARPA) and AIS. So, TT (ARPA) and AIS do not function
outside of the range.
1 Press MENU key to display “Menu”.
Select [TARGET] => [INPUT RNG], and press ENT key after selecting the setup value.
Setting value: 1.0NM to 64.0NM
Number
Label
5
Sarah J
ECHO PA ST POSN TIME
TRAIL V ECT
DISPLA Y CPA/TCPA
ALARM CPA
TA RGET
⇒
TCPA
NAV TOOL ANCH
⇒
NUMBER ON/OFF
MA P A IS ID DISP TY PE LA BEL ON/ OFF
BRILL TT ID DISP TY PE
SYSTEM ID DISP SIZE
MA INTENA NCE