User's Manual

MDC-5200/5500 Series Chapter 4 Target (AIS and TT)
0093155002-03 4-17
Delete TT target
There are two methods to delete TT target.
First method is to use menu operation, second is to use cursor operation.
Menu operation
This is to delete the TT target selected [SELECT ID] and [DELETE] function.
1 Press MENU key to display “Menu”.
Select [TARGET] => [TT] => [SELECT ID] => select ID number, and press ENT key.
Selection values: 1 to 100
2 Select [DELETE] => and press ENT key.
Cursor operation
1 Move cursor to a TT (ARPA) target to be deleted, keep OFF key pressed, and then press ACQ
key.
Delete all TT targets
1 Press MENU key to display “Menu”.
Select [TARGET] => [TT] => [ALL DELETE], and press ENT key.
All TT targets acquisitions are deleted.