User's Manual

Chapter 6 Map operation MDC-5200/5500 Series
0093155002-03 6-4
4 Move cursor to third input position, then press ENT key. No.3 mark is displayed, and a line is
generated from No.2 to No.3.
You can input up to 100 point. When input is completed, press MENU key. Mark number will
disappear.
5 Refer to 3.4 Nav line cross “How to edit” for the procedures to make plural divided coast line in the
memory of same block number.
(2) BLOCK NUMBER OPERATION
1 Press MENU key to display “Menu”.
Select [MAP] => [COAST LINE] => [EDIT] => [BLOCK NUMBER] => [select number 1 to 10] =>
Following input menu is displayed.
2 Select [LAT] => Latitude data set screen is displayed.
Set LAT data by moving of trackball/joystick to the right, left, up or down, and press ENT key.
3 Select [LON] => Longitude data set screen is displayed.
Set LON data by moving of trackball/joystick to the right, left, up or down, and press ENT key.
4 Select [COLOR] => Eight colors box is displayed.
Select color by moving of trackball/joystick up or down, and press ENT key.
5 Select [DIVIDE] => [ON] or [OFF], and press ENT key.
[DIVIDE] => [ON] means that it is not connected coast line to the next number data.
6 Select [SET], and press ENT key to save input data.
NUMBER 1
LAT 0˚ 00.000N
LON 0˚ 00.000E
COLOR
DIVIDE OFF
SET
0˚ 00.000N
0˚ 00.000N
90˚ 00.000S-
90˚ 00.000N
x: Block number
(1 to 10)
Press
MENU key
x-3
x-1
x-2
1-
1-2
1-3
DIV IDE
ON
1-4
1-5 1-6
1-1