User's Manual

Chapter 6 Map operation MDC-5200/5500 Series
0093155002-03 6-12
6.10 WPT ID DISP
This function when activated can display WPT name information from external device such as chart
plotter or GPS navigator. This applies to all waypoints from WPT and also ROUTE waypoints. When
[WPT ID DISP] turned on, ID information will be displayed next to waypoints and when turned off only
waypoints without ID information will be displayed.
1 Press MENU key to display “Menu”.
Select [MAP] => [WPT ID DISP] => [ON], and press ENT key.
6.11 TARGET TRACK ID
When tracking a target and past target track is activated, each track will have a label number
associated with it. TARGET TRACK ID and the numbers will disappear or reappear with turning this
function “on” or “off”.
1 Press MENU key to display “Menu”.
Select [MAP] => [TARGET TARCK ID] => [ON], and press ENT key.