User's Manual

MDC-5200/00 Series Chapter 7 System and Maintenance menu operation

0093155002-03 7-3

7.4 Sound setting

Sound menu is to turn sound ON/OFF, setup frequency of sound in Operation unit, key click sound and

external buzzer.

Sound ON/OFF

1 Press MENU key to display “Menu”.

Select [SYSTEM] => [SOUND] => [SOUND] => select [ON] or [OFF], and press ENT key.

Sound frequency

Press MENU key to display “Menu”.

Select [SYSTEM] => [SOUND] => [FREQUENCY] => select [1 to 8], and press ENT key.

Selection values: 1 to 8

1: Lowest frequency

8: Highest frequency

Key click ON/OFF

1 Press MENU key to display “Menu”.

Select [SYSTEM] => [SOUND] => [KEY CLICK] => select [ON] or [OFF], and press ENT key.

External buzzer setting

External buzzer signal (Failure alarm) can be output from J1 connector on the back panel.

Output signal is relay contact. (Alarm contact will close in case of failure)

Output of relay contact is continuous when set to continue.

Output of relay contact is intermittent when set to interval.

1 Press MENU key to display “Menu”.

Select [SYSTEM] => [SOUND] => [EXT BUZZER] => select [OFF], [CONTINUE] or [INTERVAL],

and press ENT key.