User's Manual

MDC-5200/5500 Series Configuration items
0093155002-03 xxv
Option list
No. Name Type Comment
1 Gyro Interface S2N, U/N 9028C Gyro converter
2 Log pulse NMEA
converter
L1N, U/N 9181A 200pulse/NM only
3 Gyro / Log
interface
ADPC-101
4 Rectifier unit PS-010 5A fuse attached
VL-PSG001 20A fuse attached
5 AC power cable VV-2D8-3M Without a connector on the both sides
6 Junction box JB-35 With CW-376-5M
7 Connecting
cable
CW-373-*
*: 5M, 10M or 30M
With 6-pin water resistant connectors at both
ends (cable for data)
CW-374-5M
With a 6-pin connector and a 6-pin water
resistant connector (cable for data)
CW-376-5M
With a 6-pin water resistant connector and one
end plain (cable for data)
CW-387-5M
With a 8-pin water resistant connector and one
end plain (cable for AIS)
CW-561-*
*: 10M or 30M
With 12-pin water resistant connectors at both
ends (cable for remote display)
CW-576-0.5M
With a 10-pin water resistant connector and
D-Sub connector (analog RGB)
+Alarm out
CW-560-2M
With 15-pin water resistant D-Sub connectors at
both ends
(Cable for VDR or external Display unit to
connect CW-576-0.5M)
CW-401- *
*: 5M or 10M
Operation unit (MRO-108) cable
8 Antenna unit –
Display unit
connecting cable
242J159098C-20M With a connector on the both sides
Note:
For MDC-5204/5504
242J159098D-30M
242J159098*-**M
**: 100 m max
CW-845-*
*: 20M, 30M,
50M, 65M
With a connector on the both sides
Note:
For MDC-5206/5212/5225/5506/5512/5525
CW-845-**M
**: 100 m max