User's Manual

Chapter 2 Radar Basic Operation MDC-5200/5500 Series
0093155002-03 2-4
2.3 Transmission
Transmission ON
After preheating time countdown is completed, the radar can be placed in transmit mode.
Press STBY/TX key, or select the STANDBY box at the upper left corner of the display
using trackball/ joystick, and press ENT key.
Radar system will start transmission.
The status of STANDBY changes to TRANSMIT.
Transmission OFF
Press STBY/TX key, or select the TRANSMIT box at the upper left corner of the display
using trackball/joystick and press ENT key to stop transmission.
The status of TRANSMIT returns to STANDBY at upper left of the display.
By STBY/TX key
By trackball/Joystick