User's Manual

Chapter 2 Radar Basic Operation MDC-5200/5500 Series
0093155002-03 2-28
2.16 Measurement distance/bearing by ERBL
The given point of distance and bearing can be measured with the cursor as follows.
(For MDC-5500 series)
1 Press ERBL key and ERBL is displayed.
2 By moving cursor to target A, measurement of distance and bearing from target A to target B can
be obtained by using VRM knob and EBL knob.
3 Pressing ENT key (while pressing OFF key) returns CURSOR to the own ship position.
Therefore, it is possible to measure the distance/bearing from the own ship position.
OFF
OFF key
ENT
ENT key
ERBL R
304.2
°
2.806NM
Own ship
ERBL R
304.2
°
2.806NM
ERBL R
000.0
°
1.000NM
ERBL
CURSOR
Target B
Target A