User's Manual

Chapter 2 Radar Basic Operation MDC-5200/5500 Series

0093155002-03 2-30

Change ERBL mark to LINE or RING

ERBL mark can be changed from LINE to RING.

1 Press MENU key to display “Menu”.

Select [NAV TOOL] => [ERBL] => [RNG] => select [LINE] or [RING], and press ENT key.

Change ERBL offset method

(MDC-5500 series only)

ERBL offset function can be operated by “CURSOR” or “TM”.

1 Press MENU key to display “Menu”.

Select [NAV TOOL] => [ERBL] => [OFFSET] => select [CURSOR] or [TM], and press ENT key.

[CURSOR]: The basic point of ERBL moves with the movement of the cursor.

[TM]: A cursor position becomes the basic point of ERBL.

After that, a position is fixed without synchronizing cursor movement.

The operation is limited to a bearing marker and range marker.

Note: [TM] function needs heading and Lat/Lon signal input of the own ship.

A basic point moves to the position of the last [TM] setting.

Move cursor in a new basic point, and press ERBL key.

(LINE) (RING)

ERBL

CURSOR

Target B

Target A

ERBL R

000.0