Parts No: KSM-200□LN2M 1. Scope The KSM-200□LN2M consist of a PIN Photodiode of high speed and a preamplifier IC in the package as an receiver for Infrared remote control systems 2. Features ◆ 2.7 ~ 5.5 Volt supply voltage, low power consumption ◆ Shielded against electrical field disturbance ◆ High immunity against ambient light ◆ Easy interface with the main board ◆ TTL and CMOS compatibility ◆ One mold package ◆ RoHS Compliance 3.
Parts No: KSM-200□LN2M 7. Electrical Characteristics Parameter [ Ta= 25℃, Vcc= 5.0V ] Symbol Min. Typ. Max. Unit 2.7 - 5.5 V Vcc=5V - 1.0 Vcc=3V - 0.8 2.0 mA λp - 940 - nm fo - *4 - ㎑ 0˚ 12 - - m ±30˚ 10 - - m - V Supply Voltage Range Vcc Current Consumption Icc Peak Wavelength *3 B.P.
Parts No: KSM-200□LN2M 8. Measure Method 8-1.
Parts No: KSM-200□LN2M 9. Standard Inspection Among electrical characteristics, total quantity shall be inspected as below 9-1. Front distance between emitter and detector 9-2. Current consumption 9-3. H level output voltage 9-4. L level output voltage 10. Customer must check below clause before using 10-1. When this infrared remote control detecting unit shall be adopted for wireless remote control, please keep the following standards.
Parts No: KSM-200□LN2M 11-7. The decrease in distance, the output noise, the malfunction, etc. might occur because of a surrounding electromagnetic environment. 11-8. To prevent static electricity damage to the Pre-AMP make sure that the human body, the soldering iron is connected to ground before using 11-9. This device has to control of static electricity KODENSHI Korea Corp. guarantees a KSM-200□LN2M up to M.M 200V , HBM 2KV M.
Parts No: KSM-200□LN2M KKC-QM-043-2(B) 7/8
Parts No: KSM-200□LN2M KKC-QM-043-2(B) Distributed by Conrad Electronics SE 8/8
