Instruction Manual

Ascent® 7.0 Release Script for FileNet Panagon Content Services 5.2-5.4 Release Notes
Kofax Image Products 11
Upgrading From Version 5.0 of the FileNet Content Services Release Script
We recommend that you upgrade to version 6.0 of the FileNet Content Services release script first.
Then, upgrade to Release Script for FileNet Panagon Content Services. Alternatively, you can
uninstall version 5.0 of the FileNet Content Services release script. In some cases, you may need to
re-enter your release setup settings. If you do, you may want to take notes on the release setup
settings defined for your current version of the release script before you install version 7.0. An
easy way to do this is to capture and save screen shots of the release setup settings.
Upgrade Instructions
Use the following instructions to upgrade to the Release Script for FileNet Panagon Content
Services.
X To upgrade the script
1 Release any existing batches associated with the release scripts. Refer to Releasing Batches
on page 21 for more information.
2 From the Definitions panel in the Administration module, select the Batch class tab and
right click the applicable document class associated with the release script. (Expand the
batch class item to select associated document classes.) A context menu will display.
3 From the context menu, select “Release Scripts.” The Release Scripts dialog box will
display.
4 From the Release Scripts dialog box, ensure that the previous version of the FileNet
Content Services release script is selected from the list of Assigned Release Scripts (on the
right-hand side of the screen). Then, select the “FileNet Content Services 5.2-5.4” release
script from the list of Available Release Scripts (on the left-hand side of the screen).
5 Click Upgrade. When prompted to confirm that you want to upgrade, click Yes.
Once you have upgraded, you should log on to the FileNet Content Services release script and
verify that all of the settings are correct.
Before you can use the upgraded release script, you must republish the associated batch class. See
the section Publishing a Batch Class on page 20 for instructions.
Note It is recommended that you run some sample batches through the system to test the
operation of the release script.