User Manual

Processing Tutorial
Getting Started Guide (Free-Form)
25
6 Click Open to import the images and establish document boundaries.
7 Select Batch | Close and click Yes to the message box.
The Create Batch window will display again.
8 Click Cancel to finish creating batches.
9 Click Batch | Exit to close Kofax Capture Scan.
X To recognize the data
1 Open Recognition by clicking Start on the taskbar to display the menu, and
selecting:
All Programs | INDICIUS | Recognition.
2 Select Session | Select Batch.
3 Select the batch created in Scan from the list.
4 Click Ok.
Recognition will begin processing the batch. Information messages will be
displayed and the “Docs Processed” should increment. When “Docs
Processed” reaches 9, the status bar will display “Idle”.
5 Select Session | Exit to close Recognition.
Note To view the recognition process, select “Show processing” from the second
drop-down list in the Display panel before selecting the batch. Select “Step
processing” to run Recognition in a debug mode and enables you to control the
processing.
X To complete the data
1 Open Completion by clicking Start on the taskbar to display the menu, and
selecting:
All Programs | INDICIUS | Completion
2 Select Session | Select Batch.
3 Select your batch from the list.
4 Click Ok.
5 Complete the data as before when running from Batch Manager.
6 When the End Of Batch window displays, click Exit Completion.