User Guide

The QC Mode determines when you want
the VRS user interface (UI) to open for
image quality inspection and interactive
updates. After installation, the mode is set
to On Errors, but you can easily change it.
Once selected, a QC mode setting stays in
effect until changed, even across scanning
sessions. The currently selected QC Mode
is indicated with a check mark.
1 From the Windows taskbar, right click
on the VRS icon.
2 From the VRS menu, select QC Mode.
3 Select a QC mode from the menu.
Set the QC Mode...
VRS UI opens only
when exception
conditions occur during
scanning. This is the
default setting after
installation.
On Errors
VRS UI opens after each
document or after each
side of a duplex
document scans.
Every Page
VRS UI opens when you
scan the first page of a
batch and when excep-
tion conditions occur.
First Page
VRS dialogs remain out
of view, even if excep-
tion conditions occur.
Disabled
9
QC Modes Menu