User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index
Appendix F
98 VRS User’s Manual
• Move the slider to the right to increase the level of background region
processing in color documents. A high value increases the likelihood that
a pixel will be determined to be part of the image background.
• Click the arrows of the text box to increase or decrease the Color
Saturation Aggressiveness value.
• Click in the Color Saturation Aggressiveness text box and type a value.
10 You can use the Color Selection settings to override the results of Automatic
Color Detection, and they apply only to the current image in a batch. These
settings are available only if Automatic Color Detection is enabled. You can
select the following options:
• Color: Image is processed in color, regardless of the results of the color
detection process.
• Black & White: Image is processed in black and white, regardless of the
results of the color detection process.
• Automatic: Image color is processed according to the results of the color
detection process. This is the default selection.
11 If you make adjustments that you do not want to save, click Reset to clear
them and restore the default values.
12 When you are satisfied with the new Color tab settings, click OK. The settings
are saved to the profile that is currently selected.