User Guide

VRS User’s Manual 5
Chapter 2
Operating VRS
Introduction
This chapter explains how to operate VRS using the default settings, how to set up
custom profiles, and how to configure and use the manual image enhancement
features.
Scanning with VRS Default Settings
With VRS, you can scan documents and accurately capture data in the shortest time
possible using the default settings. These default settings have been carefully chosen
to allow VRS to excel at a wide range of documents without adjustments. In order to
take advantage of VRS, simply start VRS using the instructions below and scan.
Starting VRS
Once VRS is installed and you have opened your scan application, select VRS, as
described in the following procedure.
X To start VRS
1 Power on your scanner and switch on your PC.
2 Start your scan application.
3 From the scan application, select a VRS scan source. The format for the dialog
box used to select the VRS scan source and the name of the scan source will
vary, according to your scan application (ImageControls-based, ISIS-based, or
TWAIN-based). Generally, the name of the VRS scan source will follow one of
these three formats:
• <Your Scanner Model> with VRS (ImageControls-based applications)
• Kofax VRS Scanner (ISIS-based applications)
• Kofax VRS – TWAIN (TWAIN-based applications)
Refer to Figure 2-1 through Figure 2-3 for examples.