User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index
Chapter 2
10 VRS User’s Manual
Figure 2-7. Kofax VRS TWAIN Interface – Select Source
3 The Kofax VRS TWAIN interface will launch. Make your selections from the
General group, such as the Source, DPI, Color Mode, Paper Size, etc.
4 If desired, click Save to create a profile to save the settings for future use.
a At the Save Profile dialog box, type a name for the profile.
b Click OK. In the future, you can load a profile by selecting it and clicking
the Restore button, or erase it by clicking the Delete button.
Figure 2-8. Kofax VRS TWAIN Interface - Save Profile Dialog Box
5 Click Scan to scan, or click Cancel to exit without making any changes.