User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index
Operating VRS
VRS User’s Manual
11
Kofax VRS ISIS Interface
The Kofax VRS ISIS interface is designed to serve as a liaison between your ISIS scan
application and VRS. In most cases, the Kofax VRS ISIS interface will automatically
appear whenever you select the Kofax VRS scanner source.
Figure 2-9. Kofax VRS ISIS Interface
Some ISIS applications hide the Kofax VRS ISIS interface and use their own interfaces
instead.
You can use the Kofax VRS ISIS interface to control scanner features made available
via the ISIS driver. The interface is divided into two groups: the Scanner Presets
group and the General group.
You can use the Scanner Presets group to create and manage configuration settings
(scanner presets). You type in the name of a new preset which can then be saved,
restored, or deleted using the New, Save, Restore, or Delete buttons.
Note The Profiles (Scanner Presets) that you create on the Kofax VRS ISIS interface
are different from the profiles created on the Profile tab of the VRS Interactive
Properties dialog box.
The General group consists of the following options:
• Source (Paper Source) – Select between the available input paper sources:
Flatbed or ADF.