User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index
Operating VRS
VRS User’s Manual
13
Figure 2-11. Kofax VRS ISIS Interface - About Dialog Box
X To scan using the Kofax VRS ISIS interface
1 Open your scan application.
2 Select the Kofax VRS Scanner source.
Figure 2-12. Kofax VRS ISIS Interface – Select Source Dialog Box
3 The Kofax VRS ISIS interface will launch, as shown in Figure 2-9. Make your
selections from within the General group, such as the Paper Source, DPI,
Mode, Paper Size, etc.
4 If desired, click New to create a profile to save the settings for future use.
a At the New Profile dialog box, type a name for the profile in the text box.
b Type the filename for the document into the text box.