User Guide

Chapter 2
18 VRS User’s Manual
Every Page
VRS dialog boxes open after each document scans, or with duplex scanning, after
each document side scans. This mode can be used for extremely complex documents
that require individual adjustments. This is an unusual condition because VRS has the
ability to handle a wide range of document types without any adjustments.
Disabled
VRS dialog boxes remain out of view, even if exception conditions occur.
Hardware Warnings
You can use the Hardware Warnings option to specify how to respond to hardware
conditions such as Paper Jam, Out of Paper, and Cover Open on a global scale.
Selecting the Hardware Warnings option means that you are choosing to handle these
errors exactly as defined by the Actions in the Administration Utility. When this
option is not selected, it is the equivalent of choosing to Return Error (see the Action
Options section on page 25 for a description) as your Action for all hardware error
conditions in the Administration Utility.
Note If you have a Böwe Bell + Howell Spectrum series scanner and you selected
VRS Non-Interactive mode during the installation process, your default QC Mode is
Disabled and the default value of the Hardware Warnings setting is off (unchecked).
VRS Non-Interactive mode only applies to Böwe Bell + Howell Spectrum series
scanners. For more information, refer to VRS Non-Interactive Mode on page 81.
X To change the QC mode
1 From the Windows taskbar, right-click on the VRS taskbar icon.
2 From the VRS menu, select QC Modes.
3 From the QC Modes submenu, select an operating mode.