User Guide

Chapter 2
20 VRS User’s Manual
1 Böwe Bell + Howell Spectrum series scanners only
If desired, you can modify the VRS Administration Utility settings. Before scanning,
set up parameters that define your requirements for image quality and exception
handling. To set the parameters, open the VRS Administration Utility dialog box by
selecting the Admin Utility command from the VRS menu.
From the Warnings and Errors tabs, you define settings that tell VRS exactly how to
respond when it detects an exception image, an equipment conflict, or a paper
transport issue. You can use the default settings on the Warnings and Errors tabs, or
customize how VRS handles each exception type. Once you are satisfied with the
settings, click Save. Changes that you have made on any of the tabs are saved
permanently (until changed) and they take effect at the start of the next scan
operation. When you use the Cancel button to dismiss this dialog, changes made on
any of the tabs are automatically discarded.
For detailed information on how to modify settings on the VRS Administration
Utility, refer to the next section, Warnings Tab, the Errors Tab section on page 23, or the
Accelerated Scanning Tab section on page 26. A listing of the default VRS
Administration Utility settings is also available from the online help system.
Errors Multifeed
1
NA Auto Resolve NA
Errors Scanner Offline
1
NA Auto Resolve NA
Errors Feeder Timeout
1
NA Auto Resolve NA
Errors Scanner Stop
Key
1
NA Auto Resolve NA
Errors Scanner Page
Sensor Error
1
NA Auto Resolve NA
Accelerated
Scanning
NA NA NA Image quality: Best
Acceleration: None
NA
1
Table 2-1. VRS Administration Utility Dialog Box Default Settings (continued)
Tab Warning/Error
Type
Threshold Action Setting