User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index
Operating VRS
VRS User’s Manual
31
Using VRS While You Scan
VRS is designed so that you may modify images manually during a scanning session.
This is accomplished through the VRS Viewer and the VRS Interactive Properties
dialog box, which provides an interactive settings control equipped with controls for
real-time image correction. This section explains how to use VRS while you scan to
create great images.
When Does VRS Come into Play?
While scanning, the VRS Interactive Properties dialog box and the VRS Viewer open
under the following circumstances:
• When VRS intercepts an exception image for which the response is defined as
Interactive. See the VRS Administration Utility section on page 19.
• As defined by the active operating mode. See QC Modes on page 17.
The VRS Viewer and the VRS Interactive Properties dialog boxes open together. You
can use the VRS Interactive Properties dialog box to apply attribute changes to the
image in the VRS Viewer. For more information, see the next section, Using the VRS
Viewer, as well as the section, Updating Image Properties Using the VRS Interactive
Properties Dialog Box on page 34.