User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index
Chapter 2
36 VRS User’s Manual
About
Use the About tab to view information about your VRS version, as well as contact
information for Kofax Image Products, Inc. For details, refer to “Using the About Tab”
on page 61.
VRS Interactive Properties Dialog Box Buttons
These buttons are available from each of the VRS Interactive Properties dialog box
tabs. When VRS restarts, the dialog box resets to the last selected profile’s settings.
OK
Use the OK button to transmit the current settings to your scan application. If the VRS
Interactive Properties dialog box opened because of an exception, the settings will
only apply to the image in question. If the Interactive Properties dialog box appeared
as the result of a First Page QC mode, or in connection with the Preview option, then
the changes apply to subsequent scans or batches.
Cancel
Use the Cancel button in Preview to close the dialog without applying any changes. If
an exception is detected when scanning, use this button to return an error (without
the error image itself) to the scan application. In addition, the batch scan will be
stopped.
Reset
The Reset button clears any changes and resets all settings to their original values.