User Guide

Table Of Contents
Chapter 2
56 VRS User’s Manual
4 Select Save As. The new profile name appears in the Available Profiles list,
and it becomes the active profile.
5 Notice how VRS automatically associates a function key to the first 8 profiles.
You can change the sequence of any profile and its associated function key by
moving a profile up or down with the Move Up and Move Down buttons.
6 The function keys are only active when the VRS Interactive Properties dialog
box is active. Once you have created a profile, the Cancel button will not undo
the changes to the Profile tab. You will need to change the active profile or
remove it as described in the following topics.
X To change the active profile
1 At the VRS Interactive Properties dialog box, select the Profile tab.
2 From the Available Profiles list, select the profile you want to use.
3 Select the Load button. (This step is important; clicking the OK button before
you click the Load button will not change the active profile.)
4 Click the OK button.
- or -
1 From the VRS Interactive Properties dialog box, select the Profile tab.
2 Do one of the following:
From the Available Profiles list, double-click the name of the profile you
want to use.
Press the corresponding function key on the computer keyboard to load a
profile. The function keys are only active when the VRS Interactive
Properties dialog box is selected.
- or -
1 From the VRS menu, select the Profile command.
2 When the Profiles submenu opens, select the name of the profile you want to
use. The profile selection stays in effect until you change it again.
Note If an image is open in the VRS Viewer when you change the active
profile, the image is refreshed with the new settings.