User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index

Chapter 2
58 VRS User’s Manual
Using the Options Tab
Some scanner features are only available from the Options tab. If VRS supports your
scanner’s Advanced Settings or Advanced Properties dialog box, the Special Features
button will be enabled. If your scanner driver does not support an Advanced Settings
dialog box, this button will be unavailable.
Note The Options tab is hidden unless the VirtualReScan Interactive Properties
dialog box is invoked in Preview mode. In addition, while the Advanced Settings
dialog box is displayed, the VRS Interactive Properties dialog box is not available.
Figure 2-43. Options Tab
Clicking the Special Features button when it is enabled invokes the Advanced
Settings dialog box for your scanner. Once you have made selections to the Advanced
Settings dialog box and clicked OK, those changes will remain in effect until you
change them again.
Some of the available features may include:
• Color Dropout (Böwe Bell + Howell Spectrum series, Fujitsu fi-4860C,
Fujitsu fi 4990C, and Fujitsu M3091DC)