User Guide
Table Of Contents
- VirtualReScan 3.5 User’s Manual
- Contents
- How to Use This Guide
- Overview
- Operating VRS
- Introduction
- Scanning with VRS Default Settings
- Kofax VRS Scan Interfaces
- Configuring VRS Before You Scan
- Using VRS While You Scan
- VRS Advanced Properties Dialog Box Overview
- VRS Restore Default Values Utility
- Long Paper Support
- VRS Non-Interactive Mode
- Enhanced Bar Code Engine
- Patch Code Recognition
- Advanced Color Processing
- Index

VRS Restore Default Values Utility
VRS User’s Manual
77
Restoring VRS Settings
This procedure gives a quick overview of how to use the RDV utility.
X To restore VRS settings to the factory defaults
1 Double-click on the RDV desktop icon to launch the utility.
2 Select the Restore factory default settings option, which will update your
settings from the Restore Default Settings utility.
-or-
If you want the most current VRS settings and have Internet access, select the
Download latest defaults from the Kofax Web site option. This will
automatically launch your Web browser and begin the download of the
factory default settings. Again, you must have Internet capability to use this
feature.
3 Click Apply.
4 Select OK. The settings will be restored.
Note There is no need to restore VRS settings to the factory defaults when you choose
to select another scanner as the default VRS scanner. Default settings are
automatically updated when you change the VRS scanner using this utility.