User Guide

Chapter 3
100 VRS User’s Manual
Digits
The page counter length can be specified via a drop-down list. The available values
depend on the scanner as well as on the installed endorsing hardware. Table 3-11 lists
the maximum number of digits per scanner and the resulting counter value. The list
contains only the available values for page counter length. Select None if you do not
wish to increment the counter.
Note This drop-down list is only available when the Enable check box is selected.
Start At
The starting page counter value is set to 1 initially, but it may be reset using the Start
At text box. When you start a new batch, the Page Counter Starting Value is the next
number in the sequence based on the final page counter value from the previous
batch. Again, you are free to enter a new value into the Start At text box instead.
Table 3-11. Maximum Page Count per Scanner
Endorser and/or Page
Counter
Fujitsu fi-4990C Fujitsu fi-4860C Böwe Bell +
Howell Spectrum
16-bit endorser: 5
digits (drop-down list
is disabled.)
65,535 65,535 NA
24-bit endorser: 5 or 8
digits
99,999 and 16,777,215
respectively
99,999 and 16,777,215
respectively
NA
1 to 10 digits; 5 digits
is the default
NA NA The n-digit page
counter will roll
over at ( 10**n) – 1.