User Guide

Chapter 2
6 VRS User’s Manual
This menu gives you options to preview and update image properties, select or
change an image properties profile, choose an operating (QC) mode, or specify
preferences for responding to potential errors and events.
The VRS taskbar menu is not available while scanning is in progress or when the VRS
Interactive Viewer is open (even though the VRS taskbar icon is still active). When the
VRS taskbar menu is unavailable, it will appear dimmed, as shown in Figure 2-3.
Figure 2-3. VRS Taskbar Menu - Unavailable
VRS Taskbar Menu Commands
This section explains each command that is available from the VRS taskbar menu.
Preview
You can use the Preview command to view the last image scanned during the current
session. If no image is available, you can select Preview after scanning a sample
document to test or verify image property settings. For details, refer to Using the VRS
Interactive Viewer on page 27.
Profile
You can use the Profile command to select from the list of VRS profiles. The Profile
submenu indicates the currently active profile with a check mark, as shown in
Figure 2-4.
Figure 2-4. VRS Profiles List