User Guide

Chapter 3
38 VRS User’s Manual
• Page Size: Select a paper size, such as Letter, Legal, A5, etc.
• Orientation: Select the paper orientation (portrait or landscape).
• Simplex/Duplex: Select single-sided or double-sided scanning.
You can access the VRS Interactive Viewer by clicking the Advanced button, and you
can access the VRS Administration Utility by clicking the VRS Admin button.
X To scan using the Kofax VRS ISIS interface
1 Open your scanning application.
2 Select the “Kofax VRS Scanner” source and click OK.
Figure 3-9. Kofax VRS ISIS Interface – Scanner Selection Dialog Box
3 The Kofax VRS ISIS interface will launch, as shown in Figure 3-8. Under
General, select settings such as the paper source, DPI, mode, and paper size.
4 If desired, click New to create a profile to save the settings for future use.
a At the New Profile dialog box, type a name for the profile in the text box.
b Type the filename for the profile into the text box.
Figure 3-10. Kofax VRS ISIS Interface - New Profile Dialog Box
5 Click OK to close the New Profile dialog box, or click Cancel to exit without
making any changes. In the future, you can change a profile by selecting it,
updating the settings under General, and then clicking Save. You may also
load a profile by selecting it and clicking Restore from the Kofax VRS ISIS
interface. Likewise, you remove a profile by selecting it and clicking Delete.
6 Start the scanning process.