User Guide

Operating VRS
VRS User’s Manual
77
Note As soon as you change the brightness value, the Auto Brightness option
is automatically disabled. To enable it again, select Auto Brightness again and
VRS will calculate and reapply the brightness level automatically.
3 In the Contrast text box, VRS displays the current contrast setting. To change
the setting, do one of the following:
• Click the arrows on the Contrast text box to increase or decrease the
contrast level.
• Click in the Contrast text box and type in a value.
• Move the Contrast slider control left or right to select a value.
4 In the Gamma text box, VRS displays the gamma correction setting. The
correction values range from Dark to Light, with Normal at the midpoint. To
change the setting, do one of the following:
• Click the arrows on the Gamma Correct text box to increase or decrease
the gamma level.
• Click in the Gamma text box and type in a value.
• Move the Gamma slider control left or right to select a value.
5 Click OK.
Note Changes to the Clarity panel settings are handled according to the way
the VRS Interactive Viewer was launched. If the viewer opened as the result
of an exception, the changes apply to the image in question only. If the viewer
opened because you selected Preview or First Page mode, the changes also
apply to subsequent scans. When VRS restarts, the Clarity panel is reset to the
settings in the last selected profile.