32" CURVED GAMING MONITOR 1920 x 1080, 165Hz KAMN32F16LC
Safety & Warnings 3 Components 4 Overview 5 Stand Assembly 6 VESA Mount 8 Connectivity 9 Operation 11 Cleaning & Care 17 Specifications 17 Notes 19
SAFETY & WARNINGS Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference. • Do not position the monitor on unstable surfaces. If the monitor falls, it may lead to damage and injuries to people around its vicinity. • Do not place the monitor near heat sources (for example, heaters, stoves, fireplaces). • Do not use the monitor in areas lacking adequate ventilation.
COMPONENTS 4 A Monitor (x1) B Stand stem (x1) C Stand base (x1) D Headset hook (x1) E Cable guide (x1) F Stand plate (x1) G Screw (x4) H VESA connector (x1) I DisplayPort cable (x1) J Power cable (x1) K User guide (x1)
OVERVIEW 1 Menu/enter button 2 Down button 3 Up button 4 Exit button 5 Power button 6 LED indicator 7 Power port Ports 8 3.
STAND ASSEMBLY 1. Open the packaging and remove the stand stem (B) and stand base (C). Using a screwdriver (not supplied), secure the stand stem (B) to the stand base (C) with one screw. Ensure all components are present before disposing of any packaging. Stand stem Screw Stand base 2. Slide and attach the cable guide (E) onto the bottom of the stand stem (B). Clip the headset hook (D) onto the top of the stand stem (B). Headset hook Cable guide 3.
4. Using a screwdriver, secure the stand plate (F) onto the stand stem (B) with two screws. Note: If this assembly needs to be removed, use a screwdriver to loosen the screws and separate the components. 5. Take out the monitor (A) and lay it on a flat surface. 6. Pull the release button on the stand plate (F) upwards and clamp the monitor (A) onto the stand stem (B) and stand plate (F).
VESA MOUNT 1. Open the packaging, and with the foam attached, take out the monitor (A) and place it gently on a flat surface. Remove the foam covering the back of the monitor. If the monitor is attached to the stand stem (B) or stand base (C), detach it. 2. Take out the stand stem (B) and stand base (C) from the packaging. Press the release button to remove the stand plate (D). Release button Stand plate Release button Foam 3. Using a screwdriver, loosen the four screws on the back of the monitor. 4.
CONNECTIVITY Power cable Connect one end of the power cable into the power port on the monitor. Connect the other end into a power socket. Power cable Earphones Plug in earphones (not supplied) into the 3.5mm headphone jack on the monitor. Note: If audio devices are plugged into the monitor and computer, there will be no sound. Earphones (not supplied) HDMI To allow the monitor to receive HDMI signals from the computer, plug one end of an HDMI cable (not supplied) into the monitor.
DisplayPort To allow the monitor to receive DisplayPort signals from your computer, plug in one end of the provided DisplayPort cable into the DisplayPort port on the monitor. Plug the other end of the cable into the DisplayPort output on the computer.
OPERATION 1. Connect the monitor to your computer via HDMI/DisplayPort. 2. Connect one end of the power cable into the power port of the monitor. Plug the other end into a power socket. Switch the socket on. Note: It is recommended to use a surge protector with adequate voltage if the power cable is not directly connected to a wall socket. 3. Press the power button on the monitor to turn it on. The LED indicator will turn a solid blue.
Navigation window Whilst turned on, press any button (M, , , E, ) located underneath the monitor to bring up the navigation window. These include options to go to the on-screen display menu, as well as shortcuts to sub-menus and functions. GamePlus menu OSD menu Return Lighting effect menu • Press the menu/enter button (M) to access the OSD menu. • Press the down button ( ) to access the GamePlus menu. • Press the up button ( ) to access the lighting effect menu.
On-screen display menu The on-screen display (OSD) menu can be used to adjust the monitor’s settings. When the monitor is used for the first time, optimal settings will be set as default. 1. Press any one of the buttons (M/ activate the navigation window. / /E/ ) located underneath the monitor to 2. Press the menu/enter button (M) to access the OSD menu. 3. Press the up button ( ) and down button ( settings. ) to browse through the categories of 4.
OSD menu options Below is a list of the various settings that can be adjusted through the OSD menu. Category BRIGHTNESS Sub-Menu COLOUR TEMP. 14 Description Brightness 0–100 Adjusts the display brightness Contrast 0–100 Adjusts the display contrast ECO Standard, Game, RTS, FPS, Movie, Text Sets the display’s colour balance to pre-set levels to suit different uses DCR IMAGE Options On Turns the DCR function on Off Turns the DCR function off H.
OSD SETTING RESET MISC Language English, Español, Русский, Français, 한국, Português, Deutsch, Türkçe, 简体中文, 日本 語, Polski, Italiano, Nederlands Sets the OSD language OSD H. POS. 0–100 Adjusts the horizontal position of the OSD menu OSD V.POS.
ECO modes There are various pre-set colour modes suited for various use cases available on this monitor. These can be accessed using the ECO modes menu.
CLEANING & CARE • Ensure the monitor is turned off, unplugged, and cooled before cleaning. • Clean the screen by wiping it with a dry microfibre cloth. • Clean the monitor body with a slightly damp cloth with water.
Audio Audio out Yes Speakers No Accessories Power cable Yes DisplayPort cable Yes Additional functions Low blue light Yes Flicker free Yes Physical dimensions Dimensions (with stand) 712.5 x 505.6 x 226.5mm Dimensions (without stand) 712.5 x 422.8 x 113.3mm Net weight 7.07kg Gross weight 9.
NOTES 19
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
