KA600CDSTVA 600W Corded 2-in-1 Stick Vacuum
Attention Please handle this product with care and inspect it regularly to ensure it is in good working order. If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support.
Table of Contents Safety & Warnings..................................................................................................................1 Product Overview..................................................................................................................2 Assembly.................................................................................................................................2 Operation.................................................................................
Product Overview 1. Handle 2. Top electric cord storage holder 3. Detachable rod handle 4. Power cord 5. Air outlet openings 6. Dust compartment 7. Dust filter (inside dust compartment) 8. Unlocking button for dust compartment 9. On/Off switch 10. Rod handle connector 11. Bottom electric cord storage holder 12. Crevice accessory 13. Floor nozzle attachment 14. Suction opening 15.
Fitting and removing nozzles CAUTION: Always switch off the vacuum cleaner before changing nozzles. • To fit nozzles, insert in the suction opening. • To remove nozzles, pull out of the suction opening. Floor Nozzle Attachment The floor nozzle attachment is suitable for both carpets and smooth floors.
2. Hold over a bin, carefully remove the dust filter and empty. 3. Tap the dust filter gently. 4. Occasionally wash the dust filter under cold running water. CAUTION: Do not wash the dust filter in the washing machine. 5. Leave the dust filter to air dry for 24 hours until completely dry before reinserting. CAUTION: Do not use a hair dryer. 6. Press firmly back in so it fits tightly in the dust compartment housing. CAUTION: Never use the vacuum cleaner without the dust filter inserted. 7.
