Download

Step 4: Use the smart cap to make mixed juices. Stop juice from dripping or rinse between
different juices.
• Juicing with the smart cap closed creates various mixed juices when different fruits
and vegetables, milk, banana, beans etc., are selected.
• After juicing, close the smart cap to stop the juice from dripping, especially when
disassembling the juicing bowl off the base.
• When making different juices quickly rinse away any leftover flavours by running a
glass of water in the juicer with the smart cap closed.
• Leave the smart cap open when juicing ingredients that create excessive foam
during extraction (e.g. apples, celery).
• Pay close attention when operating the juicer with the smart cap closed. Juice
may overflow if the juice collected in the juicing bowl exceeds its capacity marked
on the bowl.
Step 5: After the juice and pulp are completely extracted, switch the unit OFF.
• If the remaining ingredients in the juicing bowl have not been extracted completely,
the drum lid may not open easily. After each extraction, run the juicer for an
additional 30 seconds to let the juicer extract the remaining pulp.
• When the drum lid is stuck, press the REVERSE-OFF-OIN button in this order,
switching back and forth 2 to 3 times to dislodge. Then place hands on top of the
drum lid and firmly press down while simultaneously turning the drum lid
counterclockwise to open.
• Depending on the ingredients, pour water down the food chute to rinse out the
interior of the juicing bowl and then attempt to remove the drum lid.