Table of Contents Safety information ..........................................................................................................3 Components of the video camera...........................................................................3 Preparations before taking pictures ......................................................................4 Installing the batteries ....................................................................................................................
Safety information Before operating the video camera, please make sure that you have perused and understand the following safety measures. • • • Please do not try to open the outer casing of the camera or change the camera in any way. Only authorized Kogan technicians may repair this video camera. When operating, please keep the camera away from water or other liquids; do not use the camera with wet hands. Never use this unit in rain or snow. Wetness may lead to electric shock.
Preparations before taking pictures Installing the batteries 1. Open the battery cover. 2. Install three No.7 alkaline batteries in the battery cabin; pay attention to the positive and negative ends of the batteries. 3. After installing the batteries, close the battery cover. Inserting the memory card There is no built-in memory in this camera and no pictures and image files can be saved. If you want to shoot the files for storing, please use SD or MMC card.
LCD screen Video file size Video recording mode HD 1280X720 720 720X480 640 640X480 320 320X240 Remaining Video recording recording time mode Memory card Battery capacity level Picture taking mode Image size 8MB 3264X2448 5MB 2592X1944 3MB 2048X1536 2MB 1600X1200 1MB 1024X768 White balance Automatic Daylight Exposure compensation value Cloudy Florescent No.
Basic operations Turning video camera on and off 1. Turn on the LCD screen, press [power] key to turn on the camera. 2. Turn off the screen, turn off the video camera or press [power] key to turn off the video camera. To save the electricity, within due time after the last operation is done, the video camera powers off automatically. Only by pressing [power] key, you can turn on the camera. You can also set the automatic power off time by using the [automatic power off] function. Mode change 1.
Taking pictures 1. Turn on the video camera. 2. Set the video camera to picture shooting mode ( ). 3. Take the image you need through the LCD screen, press [shutter] key to take picture. 4. Press [up] and [down] keys to zoom in and out. • • • After each shooting, the number of shooting shown on the LCD screen will reduce by 1 automatically. For instance, if the number shown on the LCD screen is 18, then, after next shooting, the number shown will be 17.
Photometry mode White balance Exposure Shooting mode Special effect There are three photometry modes: [Central photometry]: taking the central part as the keystone to carry out photometry. [Multi-point photometry]: carry out the photometry for many points to make a comprehensive judgement. [Point photometry]: only carry out photometry for the central part then make the judgement Adjust the white balance to adapt to various light sources.
Setting menu You may set the system items by setting menu. 1. Turn on the video camera, press [menu] key to show the menu. 2. Press [right] key to select 3. Press [up] or [down] key to select the option to be set. 4. Press [right] or [OK] key to enter the sub-menu for this item. 5. Press [OK] key to confirm, press [menu] key to close the menu.
Playback Video playback 1. Set the video camera to playback mode. 2. Press [left] or [right] key to select the video file you want to play. 3. Press [shutter] key to play. Press [up] key to pause and press it again to resume. Press [right] key to quick forward and [left] key to quick back the video. Picture playback 1. Set the video camera to playback mode. The lastly recorded file will be shown on the LCD screen. If there is no file in the memory card, “no file” will be shown on the LCD screen. 2.
Menu item File locking File deletion Slide playing Special effect Swivel Picture reducing Audio memorandum Available options and functions Use this function to prevent the accidental file deletion. [Locking/unlocking single]: lock or unlock the current file. [Locking all]: lock all the files. [Unlocking all]: unlock all the locked files. For details, please refer to page 21. Use this function to automatically play files.
Connections Connecting the video camera to TV Upon being connected to TV, the LCD screen of the video camera will turn off and TV will play the function of the LCD screen of the camera. 1. Use the attached AV line to connect the TV with video camera. 2. Turn on video camera and TV, set the TV to “AV” mode. 3. When camera is set to picture shooting/video recording mode, you can browse the object to be shot on TV. 4.
Software installations (PC Only) Software installation In the included CD, there are driver programs and software for the video camera. Upon inserting the CD into the CD drive, the installation interface for software I will appear automatically. If the automatic installation interface does not appear, open [my computer] or the CD drive of the browser, double click [autorun.inf], the automatic installation interface will appear. You can also click “operation”, then input the route; for instance “D: \autorun.
Technical parameters Photoreceptor Display Focus range Aperture Shutter Definition Sensitivity White balance Exposure compensation Continuous shooting Picture effect Self-timer Memory TV system Power Ambient temperature Microphone Loudspeaker Size Weight 3 million pixel CMOS 2.7"TFT LCD screen 150cm~infinitude F: 3MM f=6.