Operation Manual

IP Camera Initial Setup Guide:
1> Connect the camera to power and network using supplied Ethernet cable
2> Install camera software using supplied CD or download
from http://www.sendspace.com/pro/dl/kmrj2u
3> Once all software has been installed, open the "Search Devices" program on your computer
4> Select the "Search" option. Your camera will appear with the device name of "IPCAM"
5> Select the camera and choose to "Modify Settings". You will need to set the Subnet Mask,
Gateway and IP address.
6> Start with the Subnet Mask and Gateway. Match these to the Subnet Mask and Default Gateway
of your network. You may obtain this information by doing the following:
- Go to Start Menu > Run / Search Programs and Files > cmd.exe > type in ipconfig command >
press enter
Please refer to images step6a, b, c, d, e
Step6a