< > Ϯϲ s t USER MANUAL
Contents Caution Safety Information 1 2 Names of each part Front View Accessories Back View 3-4 3 3 4 Remote Control 5-6 Basic Operation 7 OSD Menu 8-14 1. Picture menu 2. Sound menu 3. Channel menu 4. Feature menu 5.
Caution The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of un-insulated “dangerous voltage” within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the persons. The exclamation point within an equilateral triangle is intend to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Safety Information To ensure reliable and safe operation of this equipment, please read carefully all the instructions in this user guide, especially the safety information below. Electrical safety v To prevent overload, don't share the same mains supply socket with too many other items of equipment. - Do not place any connecting wires where they may be stepped on or tripped over. - Do not place heavy items on the leads, which may damage them.
Names of each part Front View CH+ CHVOL+ VOLPLAY EJECT POWER Remote Control 3 Insert disc with label side towards back INPUT MENU INPUT: Display the input source menu. MENU: Display/exit the OSD menu. CH+/-: Scan through channels. VOL+/-: Adjust the volume. PLAY: Play/pause the disc playing. EJECT: Eject / Close the disc. POWER: Turn on/standby the TV set.
Names of each part RF 10 Rin 11 USB Back View Mini YPbPr VIDEO Lin 9 8 7 AC POWER IN 6 1 Headphone out 2 COAX HDMI3 3 4 PC IN 5 1 AC POWER IN 5 PC-IN 9 L/R in 2 Headphone out 6 VGA 10 USB 3 Coax 7 Mini YPbPr 11 RF HDMI1/2/3 8 VIDEO 4 4
Remote Control POWER INPUT PICTURE SOUND POWER: Turn the TV on/standby. INPUT: Press to display the input source menu. SLEEP ASPECT 1 2 3 4 5 6 7 8 9 0 FAV PICTURE: Select the picture mode. SOUND: Select the sound mode. SLEEP: Standby timer. ASPECT：Change the screen display mode. NUMBER BUTTONS Press 0-9 to select a TV channel directly when you are watching TV. Return to the previous channel viewed. FAV: Display the favorite program list. MUTE VOL CH SUBTITLE NICAM/A2 REC.
Remote Control POWER INPUT PICTURE SOUND SLEEP ASPECT 1 2 3 4 5 6 7 8 9 0 FAV MUTE VOL CH SUBTITLE NICAM/A2 REC.LIST D IS G PL EP AY REC CH.LIST U EX EN IT M D.SET D.MENU D.SUB TV/TXT D.LAN TV/RADIO CANCEL REVEAL INDEX HOLD SIZE SUBPAGE : Load/eject DVD disc. : Play/Pause program. : Previous chapter. : Next chapter. : Stop program. : Fast reverse. : Fast forward. TV/TXT: Turn off/on the Teletext display. TV/RADIO：To switch to TV or Radio state in DTV mode.
Basic Operation Power on/off 1. Connect to the power supply with the power adaptor. 2. -To turn on the TV Press POWER button on the TV or remote control. -To turn off the TV Press POWER button on the TV or remote control. DTV ATV AV YPBPR Input Source select HDMI1 Press INPUT button on the TV set or remote control to display the input source menu, and use CH+/- button on the TV set or button on remote control to select the input source, press OK button on the remote control to enter.
OSD Menu 1. Picture menu Description Picture Mode: Select your desired picture mode from Dynamic, Standard, Mild and User. Brightness: Adjust image black level. Contrast: Adjust image contrast. Sharpness: Adjust the sharpness(Gray and invalid in VGA/PC mode). Colour: Adjust image colour from black and white. Tint: Control the tint ( NTSC mode only). Colour Temp.: Select an optimum color temperature mode to suit your eyes for viewing from Warm, Cool, Standard.
OSD Menu OSD Menu 2. Sound menu Description Sound Mode: Select your desired sound mode from Standard, Movie, Music, Speech and User. Bass: Adjust the level of the lower-pitched sounds. Treble: Adjust the level of the higherpitched sounds. Balance: Adjust the audio output between left and right speakers. Surround: Turn on/off the surround sound function. Auto Volume Level (AVL): The volumes of all sources will be maintained when the function’s on.
OSD Menu 3. Channel menu(In ATV/DTV mode) Australia Description Channel Management: Enter the Channel management menu to edit the channels. Delete: Press RED button to sign the channels you want to delete, it will hint you when you exit. Lock: User must set the “Lock enable”(Feature-Lock- Lock enable) at ON to active this function. Press GREEN button to sign(lock) or cancel(unlock) the channel. And you have to enter the password to view the program.
OSD Menu Country: Select the country. When the Child Lock is on, please enter the Password (Lock Password in Feature menu) to start Auto and Manual Search. Auto Search: Press OK button to enter the Auto Search menu, select search mode, and press OK button to start auto search. Note: 1. ALL: Auto search channels for DTV, ATV and Radio. DTV: Auto search channels for DTV and radio. ATV: Auto search channels for ATV. 2.
OSD Menu 4. Feature menu Description Lock: This menu allows you to lock certain features of the television so that they can not be used or viewed. For example if you don’t want certain channels viewed by children or if the television is to be used in a hotel and you want certain channels be locked. When you enter the system lock menu you will be asked for a password. As default it is 0000. Lock Enable - Turn on/off the Lock functions.
OSD Menu Hotel Mode - Enter the Hotel Setting menu. Hotel Lock: Turn on/off the Hotel Lock function. Channel Lock: Disable the Channel menu in OSD. Picture Lock: Disable the Picture menu in OSD. Sound Lock: Disable the Sound menu in OSD. Feature Lock: Disable the Feature menu in OSD. Setup Lock: Disable the Setup menu in OSD. Key Lock: Disable the buttons on the TV set. Source Lock: Disable the input source you desired. Set Source: Select the default source when you turn on the TV.
OSD Menu 5. Setup menu Description OSD Timer: Lets you adjust the amount of time the On Screen Menu stays on the screen before disappearing. PC Setup: Change the PC Settings in PC mode. Auto Adjust: Setup the parameter of the screen automatically. H/V-Position: Adjust the transverse/vertical position of the screen. Phase: Adjust the phase of the ADC sampling clock relative to the sync signal, until a stable image is obtained.
Multimedia Operation Basic Operation 1). Press the INPUT button on the remote control to display the input source menu, select Media source by the / buttons, and press OK button to enter the Multimedia menu as shown below. DTV ATV AV YPBPR HDMI1 HDMI2 HDMI3 PC Media DVD 2). Insert USB device, and select the Media mode form Photo, Music, Movie and eBook, then you will find the name of the device display on the screen as shown below. Hints for operation 3).
Multimedia Operation 1. Photo Display photos Press / button to select the option on the table, and press OK button to change. Note: You could press OK button to display the option table when it disappears. Play/Pause the photo playing. Stop and exit the full screen program. Play the previous or next file directly. Ratate the picture(0, 90, 180, 270). Zoom in/out the picture, you could move the picture by Cursor left/right/up/down button in Zoom mode. Display the information of the current file.
Multimedia Operation 3. Movie Play movies Press / button to select the option on the table, and press OK button to change. Note: You could press OK button to display the option table when it disappears. AB Play/Pause the movie playing. Stop and exit the full screen program. Play fast backward or forward. Play the movie in slow mode. Play the movie in step mode. Set the A-B repeat playing mode. Play the previous or next file directly. Display the playing list. Display the information of the current file.
Recording Operation PVR settings Press the MENU button select Feature-PVR/Timeshift menu, press OK button to enter the menu as below. 1). Record File Format Select Record File Format mode from TS and PS for storing in the USB device. 2). Partition Select USB device informations Format: Press RED button to format the selected USB device. Set Default Partition: Press GREEN button to set the focus partition as the default partition .The recorders are stored in the default partition.
Recording Operation 5). Record List Display the Record list menu. Delete: Press RED button to delete the selected record plan. 6). Recorder Start Press OK button to start recording, as the function of the REC button on the remote control. EPG and Timer Record Press EPG button on the remote control to display the EPG menu. Reminder EPG mode: Press RED button to change the EPG display mode. Daily mode: shows the information of the programs to be broadcasted in daily mode.
Recording Operation Recording Press REC button on the remote control to start recording in DTV mode, and the TV will give you a hint. Select “OK” item, and press OK to start recording, there will be a sign on the screen. Note: a. Please make sure the USB device is on the TV. b. Please mke sure the speed and free space of the USB is enough. c. Press STOP button to exit the recording mode. d. Press Recording list button to display the Recorder list, and you could play the program you selected.
DVD Operation Press the Power button on the TV or the remote control, then press the INPUT button to select DVD mode. If there is no disc in the DVD player the screen will show "NO DISC". Insert Disc according to picture next to disc slot. Do not touch the playing surface. Hold the disc around the outside with your fingers and place the disc into the slot. The player will automatically draw the disc into the player.
DVD Operation 22
DVD Operation 23
DVD Operation 24
DVD Operation or NO disc 25
DVD Operation 26
DVD Operation 27
DVD Operation 28
Disc Care Disc Care About Disc Terms Title Generally, pictures or music compressed on a DVD are divided into several sections, "title". Chapter The smaller section unit of picture or music in a DVD under the title, usually one title is comprised of one or more chapters and each of them is numbered for easy searching, but some discs may not have a recording chapter. Track A segment of picture or music on a CD, Each track is numbered for searching.
Trouble shooting Do not use other functions that are not mentioned in this user’s manual. In case a problem occurs with your TV, please take the following steps first. If you still have the problem, turn the power off and contact the Kogan customer service center. Problem Action The screen does not appear. Is the power plug pulled out? Insert the power plug. Press the power button of the remote control. The screen appears too slowly after the power is turned on.
Specifications Techincal Specifications TV TVSystem Screen size Resolution Aerial input Power Consumption PAL BG/DK/I SECAM BG/DK 26"(diagonal) 1366 x768 pixel s(RGB) (unbalanced) 75 100-240V ~ 50/60Hz 60W 31
Manufactured under license from Dolby Laboratories. "Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
