KULED19XXXYA KULED22XXXYA KULED24XXXYA USER MANUAL
Contents SAFETY AND WARNINGS.............................................................2-4 BASE STAND ASSEMBLY INSTRUCTION .........................................5 WALL MOUNTING INSTALLATION GUIDELINES...............................5 INSTALLATION.............................................................................6-9 REMOTE CONTROL.................................................................10-11 OPERATION.............................................................................
SAFETY AND WARNINGS Important Safety Instructions Warning: To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified personnel. Warning: To prevent fire or electric shock hazard, do not expose the unit to rain or moisture. Do not expose the Adaptor and product to water (dripping or splashing) and no objects filled with liquids, such as vases, should be placed on the unit.
SAFETY AND WARNINGS High voltages are used in the operation of this television receiver. Do not remove the cabinet back from your set. Refer servicing to qualified service personnel. Never stand on, lean on, or suddenly push the television or its stand. You should pay special attention to children. Serious injury may result if it falls. To prevent fire or electrical shock hazard, do not expose the television receiver to rain or moisture.
INSTALLATION Base Stand Assembly Instruction 1. Place the TV with the display side down on a flat surface.Use a cloth to protect. Locate the bottom at the stand. 2. Fix the bottom with turning the screw tightly on the stand. WALL MOUNTING INSTALLATION GUIDELINES For wall mounting with the optional bracket, please read the following instruction and the bracket instruction. Make sure qualified service personnel perform the operation.
INSTALLATION Front panel 1: Remote control sensor. 2: Indicator LED: BLUE = POWER ON. RED = Stand-by. 3: Key board (on side of TV). 3 1 2 30 30 KEYBOARD SOURCE MENU CH+ CHVOL+ VOLSTANDBY 1．SOURCE： Displays the input source Menu. 2．MENU： Displays the main MENU. 3．CH+/CHIn TV mode, press "CH+" or "CH-" to change the channel up or down. In MENU mode, press "CH+" or "CH-" to select items. 4．VOL+/VOLAdjusts the sound level.
INSTALLATION REAR AV Connections AV L R POWER Y Pb Pr HDMI2 All the terminals are(from left to right): AV composite video input, Audio input, Power socket, YPbPr (component video) input, HDMI2 input. Note: 1. AV and YPbPr share one audio channel. 2. When the HDMI2 port receives a DVI signal, the audio signal is received from the YPbPr/AV Audio channel.
INSTALLATION AV L R POWER Y Pb Pr HDMI2 PC PRESET MODE RESOLUTION V.Freq.(Hz) H.Freq.(KHz) 1 720*400 70 31.47 2 640*480 60 31.47 3 800*600 56 35.156 4 800*600 60 37.88 5 800*600 72 48.08 6 1024*768 60 48.36 7 1024*768 70 56.
INSTALLATION AV EQUIPMENT You can use the input terminals on TV set rear as follows.
REMOTE CONTROL REMOTE CONTROL 1 16 2 17 3 18 4 19 5 20 21 FREEZE 6 7 22 8 23 9 10 24 11 12 13 CH VOL 25 REC 26 14 15 27 1:POWER:To set the TV to standby or power on. 2: :In USB mode, used as reverse key, in teletext mode used as subpage key. 3: : In USB mode, used as forword key, in teletext mode used as reveal key. 4: : Press in USB Mode to begin or continue playback. 5: : Press in USB Playback Mode to pause playback . 6:TEXT:To enter or TELETEXT.
REMOTE CONTROL TELETEXT Teletext is an information system broadcast by certain channels which can be consulted like a newspaper. It also offers access to subtitles for viewers with hearing problems or who are not familiar with the transmission language (cable networks, satellite channels, etc.) Press: TEXT You will obtain: This is used to call or exit teletext modes. The summary appears with a list of items that can be accessed. Each item has a corresponding 3 digit page number.
OPERATION Installation Guide Please select an OSD Language Cesky English Dansk Espanol Fran ais Magyar Hrvatski Nederlands Portugues Deutsch E Italiano ~ ka Polski Pycck Norsk OK Country Norway Rumania Slovenia Poland Russian Spain Porgugal Serbia Switzerland New Zealand UK Sweden China United Arab Emirates Estonia OK This screen only appears when the TV is turned on for the first time, or reset to factory settings. You can choose language, country and auto tuning programs.
OPERATION 2).DTV Manual tuning: You can select a DTV channel then find the program in this channel. Press to select the channel, then press OK to search the programs . NOTE: The Bad Normal Good bar graph on this screen shows signal intensity. DTV Manual Tuning _ VHF CH 5 + Press OK to search Bad Nomal Good 3). ATV Manual tuning : You can change the sound system, search the analog TV channels and fine tune them, then store the channels you selected.
OPERATION Favourite Press to choose the program, press the FAV button and it will show on the right side of the program. Choose the FAV program, press FAV button again, you can cancel the FAV and will disappear . Once your favorite group is created, you can press the FAV key to quickly access your favourite channel. 2. PICTURE MENU The second item of the MENU is PICTURE MENU.You can adjust picture effects here, such as contrast, brightness, etc. Press to move, press OK to adjust.
OPERATION 5.OPTION MENU To enter the Option Menu, press MENU button and then press or buttons to select the Option Menu. Once in Option Menu, press or buttons to select the settings you wish to adjust. Press MENU button to return to the Main Menu. < OPTION OSD Language English Audio Languages Subtitle Languages Country Australia PVR File System Restore Factory Default > NOTE: Restore Factory Default will clear all the programs and password.
OPERATION FACTORY RESET NOTE: If you wish to reset your TV, please select the Restore Factory Default option, this will clear all settings. 6.LOCK MENU To enter the LOCK Menu, press MENU button and then press or buttons to select the LOCK Menu. The default password is 6666. Please set a new password so it is easy to remember. Follow the on screen steps to set.
OPERATION Sample1.ts Resolution: 720x576 AudioTrack: 1/2 Subtitle: 1/1 Program: 1/1 Size: 30574 KBytes Close 8.EPG Menu (Electronic Program Guide). The EPG Menu is used to look at what is being broadcasted in DTV or Radio modes. Press the EPG Button to access the EPG Menu. You will receive detailed program information of the channel you are currently watching as well as programs in the near future.
TROUBLE SHOOTING Trouble phenomenon Symptom Picture Inspection Check Audio Snow Noise antenna position, direction or connection Ghost Normal audio antenna position, direction or connection Interference Noise electronic equipment, car/ motorcycle, fluorescent light Mute Volume (check if mute is activated or if the audio system connections are not correct) Normal Picture Mains Power cord is not inserted Mains Power switch is not activated Contrast and brightness/volume setup Press Power/Stand-
SPECIFICATIONS LED : Viewing Picture Size (diagonal) 18.5" (47cm) 21.5" (55cm) 23.6" (59.9cm) Resolution 1366x768 1920x1080 1920x1080 Aspect Ratio 16:9 TV: TV system DVB-T decode DVB-T de-modulation Digital TV: DVB-T Analog TV: PAL/SECAM Audio: MPEG2 Audio Layer I&II Video: MPEG2 Transport MP@HL Demodulator : COFDM OFDM Mod.
