QUICK START GUIDE SmarterHome™ IP54 Battery Powered Fingerprint Smart Wi-Fi Door Lock (KASHFNGDLKA)
CONTENTS Before starting........................................ 02 Installation...............................................03 Operation.................................................. 12 Using the app.......................................... 14 Troubleshooting....................................... 18 Specifications...........................................
BEFORE STARTING NOTE Please have a Phillips-head screwdriver and 4x AA batteries on hand before commencing installation. Please read the following before starting: • It is recommended to have this installed by a professional. • Please note that the connection line should not be pressed, bent or folded during installation. • Before the installation, ensure the lock is suitable for the door, or the direction of the handle must be adjusted according to the door opening direction.
INSTALLATION Installation overview 1. Front panel 2. Connection column 3. Square steel 4. Lock body 5. Connection line 6. Back panel 7. SET button 8. Connection column screws 4 9. Battery cover 10. Battery cover screw 11. Back handle 12. Connection column screws 13. Reverse lock knob 14. Back locking paddle 15. Dead-bolt 16. Latch-bolt 17. Lock body screws 18. Connection column 19. Keyhole 20. Emergency power port 21.
1. Confirming door configuration This smart lock is suitable of 4 kinds of door opening directions. Identify the correct configuration of your door before commencing installation. Left-hand door configurations From the outside, the door swings inwards to the left. From the outside, the door swings outwards to the left. Right-hand door configurations From the outside, the door swings inwards to the right. From the outside, the door swings outwards to the right. TIP If you get stuck at Step 6.
INSTALLATION (cont’d) 2. Open hole Following the hole installation template, drill the holes in your door to facilitate installation. If you require another installation template, these are available as a free download from kogan.com 3. Changing the handle direction Check if the handle direction is appropriate for the door (facing left or right). If it is correct, continue on to step 4. If is not the correct direction, this can be changed via the following: a.
4. Installing lock body Set the installation direction of the latch-bolt in the lock body according to the door opening direction. Check back to step 1 if you are unsure. To change the direction of the lock body: a. Push the reversing block to the other side. b. Push the latch-bolt into the lock and turn it 180 degrees. c. Put back the reversing block and the latch-bolt will pop up automatically. Following this, place the lock body into the door frame and tighten with 2 fixing screws.
INSTALLATION (cont’d) 5. Select parts Choose the suitable parts according to the following table. Door thickness Square steel length Connection column length Connection column screw length 40-51 mm 80mm 35mm 30mm+50mm 52-60mm 80mm 35 or 55mm 50mm+70mm 61-80mm 100mm 55mm 50mm+70mm 81-100mm 120mm 55mm 70mm+90mm 1 00mm (optional) 140mm 55mm 90mm+110mm 6. Installing the lock 6.1 Front panel a. Install 2 connection columns on the front panel.
b. Adjust the dot direction on the square steel sleeve with reference to the sticker on the rubber mat: • Left-hand door configurations: set the dot left or right • Right-hand door configurations: set the dot at the top or bottom TIP Check back to step 1 to ensure you’ve selected the correct dot position for your door configuration. c. Insert the suitable square steel into the lock body. d. Pass the connection line through the door hole. e.
INSTALLATION (cont’d) 6. Installing the lock (continued) 6.2 Rear panel a. Press the front panel and connect the connection line with the corresponding interface of the back panel, then insert the excess line into the door hole. b. Insert the back-locking paddle into the lock body. You can cut off one or two sections of the back-locking paddle according to the thickness of the door. NOTE The length of the back-locking paddle should not exceed the thickness of the door. c.
7. Installing buckle plate and buckle box Following the hole installation template (see Step 2), drill the holes in your door frame for the buckle box. Position the buckle box first, before the following with the buckle plate. Ensure the buckle plate is installed with the door guard facing door’s swing direction. 8. Installation Debugging Double check all of the following points before finalising your installation.
OPERATION Deadbolt function To activate the dead-bolt, lift up on the door handle. Adding administrators The first 3 added users will be classified as administrators and cannot be removed unless lock is reset. is used as the back and sign out button, while is used as the confirm button. 1. Remove the battery cover, short press Set (back panel) or long press . The voice will prompt “Please add administrator.” 2.
Change password 1. Press 7 and , you will hear a long beep from the lock. 2. Enter the old password that is to be changed. The voice will prompt “Please add user.” 3. Enter the new password, followed by . The voice will then say “Successful.” The previous password will now be invalid. Factory reset (Restore to default settings) 1. Remove the battery cover, long press Set for 3 seconds and verify the administrator. 2. The system will restore itself to factory default settings.
USING THE APP Installing the app Download the Kogan SmarterHome app from the Play Store (Android) or App Store (iOS). Creating SmarterHome account If you do not have a Kogan SmarterHome account, register or sign in with a verification code sent by SMS. To register: 1. Tap to enter registration page. 2. The system automatically recognises your country/area. You can also select your country code manually. Enter your email address and tap ‘Next.’ 3.
NOTES • Once paired, a voice will say “Added successfully.” • If pairing has failed, the voice will say “Add failure.” If this occurs, attempt to connect again. Pairing with AP Mode If unable to connect via the standard Wi-Fi pairing method, try the AP Mode. 1. While in the pairing mode (with number 8 flashing rapidly on the keypad), press 3 then once again to transition to AP pairing mode. The number 8 will now flash slowly. 2.
USING THE APP (cont’d) Using the app After successfully configuring, the lock will be shown on the app’s home page. Tap to enter its control page. Remote unlock If trying to unlock the door without a card, password, or fingerprint, you can use the app to approve a remote unlock. Press 4 & on the keypad to request the remote unlock. Then, in the app, tap the lock icon when it flashes to approve the remote unlock request. The door will now unlock.
Temporary password To schedule a longer-lasting temporary password, with personalised or random code options and the ability to set names and active dates, tap the ‘Temporary PW’ icon at the bottom right of the control page. You can set for current time periods (already in progress) or for future time periods which will become activate upon their scheduled start time.
TROUBLESHOOTING Cannot enter the Wi-Fi pairing mode • Ensure at least one administrator has been added. • Follow steps to pair device with Kogan SmarterHome app. • Please make sure that you are connecting with 2.4G Wi-Fi network, 5G Wi-Fi networks are not supported at the moment. • Please try with the AP pairing mode to enhance compatibility and try again. • In extreme cases, the Wi-Fi router may not be compatible with the device.
SPECIFICATIONS Dimensions Dimensions Weight 270 x 63 x 24mm 1.9kg General Capacity Water Resistant Sensor Up to 100 fingerprints or PINs IP54 Semiconductor Performance Battery DPI Identify time 4 x AA (not included) 500 0.3s Power Battery Life Supply voltage Low voltage warning Standby current ~12 months (10 entries per day) 6v 4.6v <=50mA Note: • Design and specifications are subject to change without notice. • Weight and dimension shown are approximate.
Need more information? This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
