Download

The robot consumes a small
amount of power when
charged and on the charging
base.
• The vacuum consumes a little power if it is placed
on the charging base by topping up the battery to
preserve the life of the battery.
Does the battery need to be
charged for 16 hours for the
first three times?
• The lithium battery can be used immediately after
being charged and has no memory effect.
Notification Solution
Error 1: Oh dear! I cannot find
the dust collector
• Cleaning stops when the dust box is taken out.
Error 2: Please check if the
radar on top has been
covered or blocked
• The radar top is covered; the robot has not been
placed in an open area. There should be no
obstacles within an area of 6x6m2.
Error 3: Please place me in a
new location and try again
• Pick the machine up and move it.
Error 4: Please scrub the cliff
sensor and restart me from a
new location
• The cliff sensor is covered or the vacuum is placed in
an elevated location.
Error 5: Please scrub the front
sensor and restart me from a
new location
• The infrared avoidance sensor is dirty or covered.
Error 6: Please scrub the
right-hand sensor and restart
me from a new location
• The wall sensor is dirty or covered.
Error 7: Please scrub the
radar housing on top and
restart me from a new
location
• The radar avoidance sensor is dirty or covered.
Error 8: Please check if the
bumper has been blocked in
some way
• The edge or collision sensor is stuck.
Error 9: Master, please clean
the dust container and filter
• The dust box is full or the filter screen needs to be
replaced
Error 10: Dust container has
been removed, please clean
the container and filter
• After error 9 is issued, when the dust chamber is
removed, error 10 is triggered.
Error 11: I'm stuck, please help
me!
• The machine is stuck.