SMARTERHOME SMART LED DOWNLIGHT (RGB + COOL & WARM WHITE) KALEPDLRGBCCTA
INSTALLATION Step 1: Using a hole cutter cut a 90mm diameter hole in the ceiling in the location you have selected. Ensure there is sufficient clearance around the area where you will position the fitting. Step 2: Feed The assembled product through the hole into the ceiling, plug first.
Step 3: Step 4: Compress the spring clips upwards and insert the fixture into the ceiling. Once in place the clips should spring down against the top of the ceiling and support the fixture.
Step 5:
KOGAN SMARTERHOME ™ Download the Kogan SmarterHome app from the Play Store or the App Store. Registration 1. Click "Register" to go to the Kogan SmarterHome App privacy policy page. Click "Agree" to proceed to the registration page. Fig.1 2. 3. Fig.2 Enter your mobile or email and click "Get authentication code". Enter the authentication code you received. Then enter the password and click "Completed" to complete registration.
ADD DEVICE Click "Add Device" or "+" at the top right corner of the App homepage to enter the "Add Device" page. There are two ways to add device: Add Manually and Search Device.
The app supports two configurations: Default mode and AP mode (Wi-Fi direct). Click "AP Mode" at top right of the "Default mode" page (or vice versa) to toggle between modes. For "Default mode", the indicator light on the smart device should be flashing rapidly (twice per second). If the indicator light is not flashing rapidly, click to view the instructions. Default mode: rapid flashing 1. Power on the device. Power off after 10 seconds and then power on. 2. Turn On-Off-On-Off-On (Keep time interval.
Tap Confirm when the indicator lights and follow the Wi-Fi setup prompts (Default mode), as per Fig.1–3. Names and locations of devices that have been configured successfully can be changed. 1 2 3 For AP Mode, you will be prompted to set up select a hotspot configuration.
INDIVIDUAL CONTROL Note: When devices are online, some will support use of hotkeys. Click "Common Functions" to use them. When devices are offline, they will appear as "Offline" and will not be available for use. Open the control panel for devices. For example, Fig. 1 shows that the light is off and only the timer can be accessed in the off mode. Fig. 2 shows that the light is on and scene, colour, brightness and schedule can be configured in the on mode. Click "...
Control Devices-Group control 1. Click "Create Group" under "More" on a selected device page, as shown in Fig. 1. 2. The page displays all devices with the same model number and available to be added as a group. Select a device and click "Save" and then enter group name and click "confirm" to finish, as shown in Fig. 2. 3. When a group has been created successfully, the page will be automatically redirected to the group control panel in Fig.3, where grouped devices can be managed.
AUTOMATION Click "Add smart" on the "Smart" page or "+" at the top right corner and select "Automation" to go to the smart configuration page, as shown in Fig.3 Click "+" as shown in Fig.3 to add multiple conditions or multiple actions. Fig.1 Fig.2 Fig.
Add Condition: For example, to add temperature as a condition, select temperatures as shown in Fig.2, configure temperature. Fig.1 Fig.2 Fig.3 Add Action: Click "Add action" or "+" at the top right corner to open the menu, as shown in Fig. 3. There are four types of actions: execute scene, trigger automation, send a reminder and time-lapse (see below).
Valid Time Period: You can set a valid time period for automation. For example, if you define a scene where the light automatically lights up when the motion sensor detects human presence, you can select "Night" as the valid time period. In this case, it will not automatically turn on in the daytime.
In Fig.1, select the scene and enter the Settings page. As shown in Fig.2, you can edit the scene name. Click "Add actions" or "+" in the top right corner to add the execution action. The action menu is shown in Fig. 3. Fig.1 Fig.2 Fig.
To configure a scene with "Trigger automation", you must set up an automated scene in advance. If existing automation options are available as shown in Fig. 1, select "Enabled after triggering" or "Disable after triggering". Fig.1 Fig.
Google Home Control Note: You will need to have set up a Google Home account prior to linking your Kogan SmarterHome device. 1. Select “Menu” and then “Home Control”. 2. In the “Home Control” screen, select the + icon in the bottom right. 3. A list will appear showing actions and a search function to access more apps: from here, install the SmarterHome app. Login to App Add Device Select Device 4. Log into your SmarterHome account with your email address or mobile number. 5.
Set Up New Device Add and Manage Device Assign Room Update Home Control
Alexa Note: You will need to have set up an Alexa account prior to linking your Kogan SmarterHome device. 1. Select “Menu” and then “Skills”. 2. Search for the app and enable it. 3. Log into your SmarterHome account with your email address or mobile number. 4. Select “Discover Devices” and the app will begin searching. 5. When successfully linked, you will see a list of connected Kogan SmarterHome devices. You can now control your Kogan SmarterHome devices through Alexa with your voice.
Login to App Discover Devices Setup Device
This is a Quick Start Guide, and we hope that this has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.
