Download

 Lower the volume before moving the microphone as very loud feedback can occur
when the top of the microphone is covered by hands or the microphone is moved
near to the speaker.
 Take care not to let the microphone fall or suffer physical damage.
 Do not store the microphone in a hot or damp place.
1. Connect the base to the stand.
2. Hand-loosen the base using the dial on the back to adjust its clearance, then slide
it over the installation surface and tighten it to secure. Use the small screw on the
bottom to tighten further.
3. Connect the top of the bracket to the plastic shock-proof frame.
4. Use the large screw button of the bracket to adjust the bracket angle and use the
small screw button on the frame to adjust the frame angle.
SAFETY & WARNINGS
INSTALLATION