Dimensions Guide

11-1/4" (286 mm)
Notes
Technical Information
Install this product according to the installation
guide.
All product dimensions are nominal.
10-1/8" (257 mm)Spout reach:
Lower flow kit or higher flow kit is available.
Faucet:
Faucet contains all necessary parts for both
single-hole and three-hole installations.
1.8 gal/min (6.8 l/min)Flow rate:
45 psi (3.1 bar)Pressure:
The deep roughing-in kit (1012715) is designed
for a mounting surface 1-3/8" (35 mm) to 3-3/8"
(86 mm) thick. The faucet mounting hole should
be between 1-7/16" (37 mm) to 1-1/2" (38 mm)
in diameter.
ADA, OBC, CSA B651 compliant when installed
to the specific requirements of these regulations.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
5-9-2015 04:44
Forté
®
Kitchen Sink Faucet
K-10433