How to Guide

Product Information
Applicable product:
Bath and shower trim, metal lever handle,
NPT spout (shown)
K-T10581-4
Bath and shower trim, ceramic lever
handle, NPT spout (shown)
K-T10581-4P
Bath and shower trim, metal lever handle,
slip-fit spout
K-T10582-4
Bath and shower trim, ceramic lever
handle, slip-fit spout
K-T10582-4P
Shower only trim, metal lever handle K-T10583-4
Shower only trim, ceramic lever handle K-T10583-4P
Valve only trim, metal lever handle K-T10584-4
Valve only trim, ceramic lever handle K-T10584-4P
NPT diverter bath spout K-10588
Slip-fit diverter bath spout K-10589
Required accessories:
Rite-Temp valve OR K-304-*
HiFlow Rite-Temp valve with stops K-2971-KS
* For a complete listing of all the Rite-Temp valves, refer
to the K-304-* Specification Sheet or Roughing-In sheet.
Optional accessories:
HiFlow Rite-Temp
®
thin wall installation kit 88526
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″
(45.7 cm) with single elbow between valve and wall-mount
spout.
Top of Bath
4" (10.2 cm)
5-3/4" (14.6 cm)
1/2"-14 NPT
72" (182.9 cm)-
78" (198.1 cm)
To Floor (Typical)
48" (121.9 cm)
To Floor
(Shower Only)
3-3/16"
(8.1 cm)
6-3/8"
(16.2 cm) D.
10" (25.4 cm)
To Spout
(Bath Only)
3-3/16"
(8.1 cm)
4-9/16"
(11.6 cm)
6-7/8"
(17.5 cm)
Metal
Ceramic
For slip-fit spout,
1/2" nom. tubing must extend
2-1/8" (5.4 cm) Min; to
3-1/2" (8.9 cm) Max
beyond finished wall.
For 1/2" IPS spout,
pipe must extend
4-1/4" (10.47 cm)
beyond finished wall.
Roughing-In
K-T10581, K-T10582, K-T10583, K-T10584
BANCROFT
®
BATH AND SHOWER FAUCET TRIM
BANCROFT
®
BATH AND SHOWER FAUCET TRIM
1036173-1-
C