Dimensions Guide

Required Accessories
K-304-* Rite-Temp valve OR NA
K-2971-KS HiFlow Rite-Temp valve with stops NA
* For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification Sheet or Roughing-In sheet.
Optional Accessories
88526 HiFlow Rite-Temp
®
thin wall installation kit CP Other ____
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Install straight pipe or tube drop of 7 (17.8 cm) to 18
(45.7 cm) with single elbow between valve and wall-mount
spout.
Top of Bath
4" (10.2 cm)
5-3/4" (14.6 cm)
1/2"-14 NPT
72" (182.9 cm)-
78" (198.1 cm)
To Floor (Typical)
48" (121.9 cm)
To Floor
(Shower Only)
3-3/16"
(8.1 cm)
6-3/8"
(16.2 cm) D.
10" (25.4 cm)
To Spout
(Bath Only)
3-3/16"
(8.1 cm)
4-9/16"
(11.6 cm)
6-7/8"
(17.5 cm)
Metal
Ceramic
For slip-fit spout,
1/2" nom. tubing must extend
2-1/8" (5.4 cm) Min; to
3-1/2" (8.9 cm) Max
beyond finished wall.
For 1/2" IPS spout,
pipe must extend
4-1/4" (10.47 cm)
beyond finished wall.
Product Diagram
BANCROFT
®
BANCROFT
®
BATH AND SHOWER FAUCET TRIM
Page2of2
1036173-4-
C