Installation Guide

TP-6879 3/1526 Section 1 Installation
tp6803
PIM
RXT ATS
Generator Set
NOTES:
D See Figure 3-4 for terminal block location on generator set. Check
the decal on the generator set for terminal block connections.
D See Figure 1-21 for maximum total cable length per run (3 runs
with 1 module each shown).
D See Figure 1-23 for communication connection detail (A and B,
PWR and COM).
D Use splices or wire nuts to collect multiple leads for connection to
the generator set terminal block. See Figure 1-25.
TB3
LCM or Load
Shed Kit
Figure 1-24 Accessory Module Connections (three cable runs with one module each)
A
B
COM
PWR
3
4
2
tp6803
1. Generator Set Terminal Block TB3. See Figure 3-4 for location. Check the decal on the generator set for terminal block connections.
2. Splice
3. Connect all of the shield leads on this end to GROUND at the generator set.
Generator Set
COM
PWR
B
A
3
9402 CABLE
9402 CABLE
TB3
RBUS
12 VDC
1
3
COM
PWR
B
A
Figure 1-25 Multiple Connections to the Generator Set