Dimensions Guide

25-11/16"
(652 mm)
6" (152 mm)
7-1/2"
(191 mm)
9-1/2"
(241 mm)
7" (178 mm)
6-3/4"
(171 mm)
No change in measurements if connected
with drain illustrated. (K-7273)
Pump/Control Access
34" (864 mm) W x
15" (381 mm) H Min
1-1/2" OD
12-3/16"
(310 mm)
3-15/16"
(100 mm)
23"
(584 mm)
6-3/8"
(162 mm)
1-3/8"
(35 mm)
1-3/16"
(30 mm)
24-1/2"
(622 mm)
46"
(1168 mm)
7/16" (11 mm)
72" (1829 mm)
Lumbar
Angle 35°
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
220-240 V, 20 A, 50/60 HzPump, Heater:
Technical Information
All product dimensions are nominal.
Kit is required for under-mount installations (sold
separately).
Drop-in, Under-mountInstallation:
EndDrain location:
46-1/4" x 27-1/2" (1175 mm x 699 mm)Basin area, bottom:
53" x 33" (1346 mm x 838 mm)Basin area, top:
160 lbs (72.6 kg)Weight:
50 lbs/ft² (244.1 kg/m²)Minimum floor load:
21" (533 mm)Water depth:
115 gal (435.3 L)Water capacity:
Drop-in, 1016369-7, required, includedTemplate:
Pump: 240 V, 11 A, 50/60 Hz
Heater: 240 V, 6.25 A, 50/60 Hz, 1500 W
Electrical component
rating:
VariablePump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-4-2018 01:51
Purist
®
6' Whirlpool Bath
K-1110-AH