Dimensions Guide

6-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
220-240 V, 20 A, 50/60 HzPump, Heater:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Corner, Drop-in, Under-mountInstallation:
Kit is required for under-mount installations (sold
separately).
EndDrain location:
45" x 43" (1143 mm x 1092 mm)Basin area, bottom:
If installing a rim-mount faucet, make sure there
is no interference above or below the deck before
drilling any holes.
57" x 57" (1448 mm x 1448 mm)Basin area, top:
300 lbs (136.1 kg)Weight:
53 lbs/ft² (258.8 kg/m²)Minimum floor load:
19-1/2" (495 mm)Water depth:
170 gal (643.5 L)Water capacity:
Drop-in, 68" x 68" (1727 mm x 1727 mm)Cutout:
Pump: 240 V, 11 A
Heater: 240 V, 6.25 A
Electrical component
rating:
VariablePump speed:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-8-2017 02:06
Consonance
®
70" Whirlpool Bath
K-1111-H2