How to Guide

Product Information
Applicable product:
Drop-in rim style, custom pump K-1114-CB
Fixture*:
Bathing well:
Basin area, bottom 55″ (139.7 cm) x 23-1/4″ (59.1 cm)
Basin area, top 64″ (162.6 cm) x 32″ (81.3 cm)
Weight 132 lbs (60 kg)
To overflow:
Water depth 15″ (38.1 cm)
Capacity 78.5 gal (297 L)
* Approximate measurements for comparison only.
Drop-in cut-out dimensions: 70-1/2″ (179.1 cm) x
40-1/2″ (102.9 cm)
Pump: V Hz A
1-speed 120 60 7.5
Minimum access panel
pump/control (required):
20″ (50.8 cm) W x
15″ (38.1 cm) H
Required Electrical Service
Dedicated circuit required, protected with a Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″ (61 cm)
of the pump.
Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
41 lbs/square foot (199.6 kg/square meter) loading.
If installing a rim-mount faucet, make sure there is no interference
with the drain overflow and circulating system before drilling any
holes. Consult local and national codes for minimum air gap
requirements if installing a spout on the faucet deck.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
72" (182.9 cm)
42" (106.7 cm)
1-1/2" OD
3/8" (1 cm)
21"
(53.3 cm)
3-1/2"
(8.9 cm)
2-7/8" (7.3 cm)
3" (7.6 cm)
Recommended faucet area
No change in measurements if connected with
drain illustrated. (K-11677 or K-11677M)
19-1/2"
(49.5 cm)
1-1/2"
(3.8 cm)
Drop-In Rim
Detail
1-1/2"
(3.8 cm)
Pump/Control Access
11-1/16" (28.1 cm)
3-3/4"
(9.5 cm)
1047186-1-C 2 Kohler Co.