Dimensions Guide

1-1/4"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual Current Device
(RCD).
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
120 V, 15 A, 60 HzBlower:
Technical Information
All product dimensions are nominal.
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
3-Wall AlcoveInstallation:
RightDrain location:
Remote blower installation kit is available for
relocating the blower. Provide access for servicing
the blower.
45-1/8" x 19-11/16" (1146 mm x 500 mm)Basin area, bottom:
52-3/4" x 25-5/16" (1340 mm x 643 mm)Basin area, top:
100 lbs (45.4 kg)Weight:
Do not relocate or alter the PVC tee or coiled
flexible tubing connected to the blower. Follow
the blower relocation instructions exactly.
46 lbs/ft² (224.6 kg/m²)Minimum floor load:
15" (381 mm)Water depth:
58 gal (219.6 L)Water capacity:
Blower: 120 V, 10 A, 60 HzElectrical component
rating:
2-3/16" (56 mm)Minimum flat for door:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
2-25-2018 01:57
Archer
®
5' BubbleMassage
™
Bath
K-1122-GRA