How to Guide

Product Information
Applicable product:
Bath whirlpool with integral
apron and heater, left drain
K-1122-HL shown
Bath whirlpool with integral
apron and heater, right drain
K-1122-HR not shown
Fixture*:
Bathing well
Basin area bottom 45-1/8″ (114.6 cm) x 19-11/16″ (50 cm)
Basin area top 52-3/4″ (134 cm) x 25-5/16″ (64.3 cm)
Weight 140 lbs (63.5 kg)
To overflow
Water depth 15″ (38.1 cm)
Capacity 58 gal (219.5 L)
* Approximate measurements for comparison only.
Pump: Hp V Hz A
1-speed 1.25 120 60 7
Heater: kW V Hz A
1.5 120 60 12.5
Required Electrical Service (2 required)
Two dedicated circuits required, each protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Heater 120 V, 15 A, 60 Hz
Notes
Install this product according to the installation guide.
Floor support under this product must provide for a minimum of
49 lbs/square foot (240 kg/square meter) loading.
The hot water supply should be 70% of the capacity of the bath or
greater. Installations will vary.
This fixture conforms to ANSI Standard Z124.1.2. All dimensions
are nominal.
No change in measurements if connected
with drain illustrated. (K-7272)
1/2" (1.3 cm) R.
1-1/2" OD
60" (152.4 cm)
Integral Flange
Detail
1-1/4"
(3.2 cm)
16"
(40.6 cm)
2-1/2"
(6.4 cm)
3/4" (1.9 cm)
11-1/4"
(28.6 cm)
19"
(48.3 cm)
1-1/4"
(3.2 cm)
32" (81.3 cm)
1063753-1-B 2 Kohler Co.