Specification

Technical Information
Fixture*:
Bathing well:
Basin area, bottom 45-1/8″ (1146 mm) x 19-11/16″
(500 mm)
Basin area, top 52-3/4″ (1340 mm) x 25-5/16″
(643 mm)
Weight 81 lbs (36.7 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 58 gal (219.6 L)
*Approximate measurements for comparison only.
Drop-in cutout 58-1/2″ (1486 mm) x 30-1/2″ (775 mm)
Amplifier/control: Power per channel
(rms) W
VHz
15 120 50/60z
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Residual
Current Device (RCD):
Amplifier/control: 120 V, 15 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Control amplifier fits 16″ (406 mm) center studs. A grounded
outlet within the wall framing must be within 24″ (610 mm) of
the planned control amplifier.
Cables are included, 25’ (7.6 m) each.
Floor support under this product must provide for a minimum
of 44 lbs/square foot (214.8 kg/square meter) loading.
Will comply with ADA when installed per Section 607
Bathtubs of the Act.
Ensure that the bath, user interface, amplifier, and
transducers are functional before completing the installation.
19"
(483 mm)
1-1/2"
(38 mm)
17-1/2"
(445 mm)
Drop-in Rim
Detail
1-1/2"
(38 mm)
4-1/8"
(105 mm)
16"
(406 mm)
11-1/4"
(286 mm)
2-1/2"
(64 mm)
3/4" (19 mm)
No change in measurements if connected
with drain illustrated. (K-7272)
32" (813 mm)
60" (1524 mm)
1-1/2"
Bath Drain
*Recommended User
Interface Location
Control Amplifier
User Interface
3-3/16"
(81 mm)
11-3/4"
(298 mm)
14-1/2"
(368 mm)
7/8"
(22 mm)
3-1/2"
(89 mm)
5-5/8"
(143 mm)
*10"
(254 mm)
*24"
(610 mm)
Lumbar
Angle 25˚
Product Diagram
ARCHER
®
ARCHER
®
5’ VIBRACOUSTIC
®
DROP-IN BATH
Page2of2
1201713-4-
A